Brake master cylinder for 4 wheel disk brake conversion

marshall · March 28, 2006, 07:56:24 PM

I've heard that I should be replacing the stock master brake cylinder to a unit from a Multiplia, is there a better way to do this. Is there a more current 2 circuit master cylinder that would work?

Thanks

Marshall

ChrisD · April 03, 2006, 03:01:25 PM

I have a Zastava 750 (fiat 600 body). My car originally had a double circuit brake cilinder. I installed disk brakes at all wheels of the car from a Fiat 124 and I have no problems. Why don't you try to find a Zastava brake cilinder?

guy moerenhout · April 03, 2006, 04:16:18 PM

the probleme is that here (belguim) whe d'ont find theme ,can you send me some ?

marshall · April 03, 2006, 05:49:53 PM

Hello Chris,

I'm in the USA, any suggestions on where I could get one of these master cylinders?

Thanks

Marshall

ChrisD · April 04, 2006, 05:00:37 PM

When I bought the car, the brake pump had to be changed. I bought mine from Dejan-serbia. There is a chance of beeing able to find some in another city of Greece. I will go there for some business in about a month. I hope I can find some.

marshall · April 05, 2006, 01:47:07 AM

Chris,

If you can find some of these, I would appreciate being able to purchase one from you.

Let me know.

Thanks

Marshall

zippyfiat · April 27, 2006, 06:19:44 PM

I see that Scuderia Topolino has a dual circuit master cylinder available. I have a new master cylinder from a Multipla that I am going to use. This has the larger 25mm diameter bore. I got it from a supplier in Germany.

Scuderia Topolino has some pretty nice stuff. I am going to buy his CV jointed axle setup. No more chewed up rubber-filled axle couplings!

Gil

guy moerenhout · April 28, 2006, 12:04:39 AM

you now that you can use your iron connection form your cardan also instead off the aluminium coupling.With spacer and up you go?

ChrisD · May 02, 2006, 02:15:15 PM

What exactly is that Guy? I am sic of these rubber couplings braking all the time. How do you do that?

guy moerenhout · May 02, 2006, 02:31:33 PM

you can place the Iron part from candan on the side off the wheel .Also you can fit the candans form a panda ;127 with the bearing on the side see in 1000 TC section for photos .

rstii · July 14, 2006, 07:59:19 PM

I have 2 circuit master cylinder (new) ! Send email to rstii@spray.se!!

super five · July 20, 2006, 10:15:14 PM

I also have new dual master brake cylinders for Zastava 750, they fit perfectly on all Fiat/Seat 600 bodies.

mail to: bpb@3dnet.co.yu