• abarth squadra storica forum »
  • abarth cars , our in museum »
  • fiat abarth 131 Rally Alitalia group 4 SOLD SPAIN »
  • working one

working one

Started by guy moerenhout, November 10, 2006, 05:43:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Go Down Pages1
User actions

guy moerenhout

November 10, 2006, 05:43:25 PM Last Edit: November 10, 2006, 06:00:24 PM by guy moerenhout
whe start on wiring lome and engine fitting,you see here also on the engine support the gr4 heating protection for it .Very rare piece of art
______abarth  gmr-team ______
___http://www.abarth-gmr.be ___

guy moerenhout

#1
November 23, 2006, 04:58:46 PM Last Edit: November 23, 2006, 05:03:39 PM by guy moerenhout
update
______abarth  gmr-team ______
___http://www.abarth-gmr.be ___

guy moerenhout

#2
December 08, 2006, 09:40:25 PM
somebody ask me how the engine support is so here you can see it .Original it is a rubber support with a very strong sprng inside .Sometimes I change it with a fulll rubber mount and over this the original aluminium protection for the heat ?
______abarth  gmr-team ______
___http://www.abarth-gmr.be ___

guy moerenhout

#3
December 10, 2006, 10:47:06 AM
I was buying in Turky a set off group 4 shocks but with different Bilstein insert .Do you now with no there must be in ?
______abarth  gmr-team ______
___http://www.abarth-gmr.be ___

guy moerenhout

#4
December 14, 2006, 05:28:27 PM
almost
______abarth  gmr-team ______
___http://www.abarth-gmr.be ___
Go Up Pages1
User actions
  • abarth squadra storica forum »
  • abarth cars , our in museum »
  • fiat abarth 131 Rally Alitalia group 4 SOLD SPAIN »
  • working one