I fond in belguim a nice 1977 with only 29000km on .Whe sold engine and will fit a 1800 cc twin cam with two weber carburators and some more power and go in the Polski Fiat collection from me
Hi! i hve found a picture of Polish Fiat 125p 'Monte Carlo' a civilian version, does somebody know the the type of wheels that it has on the picture? Are they Cromodora's wheels? Which type? I'm interested in, because I hve a car which is stylized to by like this on the picture /maby in the future I'll change engine and it becams a copy/.
I FIND YOUR PHOTOS AND WILL PLACE THEM
Thak you very much, I had smoe problems with placing pictures :-)
Hi. On first picture rimms seeems to be ATS classic 7 inches / 13.
On second picture(black/white) I have no idea, maby some MTX ?
first are +-6x13 max ATS, second are no MTX 7x13 this type was more flat ,I am still looking them also the 7x13 and 8x13 ATS
Yes, on first picture is my car, and wheels are ATS classic 6/13/4x100 for Opel, changed by enlarging central whole to 58mm, fixed by 'swimming' screws /I'm not sure how schould I transfer it from polish/. I'm looking for informattions about wheels on second picture - on factory folder.
PS. I know that ATS made in past wheels like this on my car for Fiats - 6/13/4x98. I have once even seen wheels like this for sale, but they were in bad condition(30 years) and very expensive, so I have decided to use ATS casllsic's designed for Opel.
good morning; most off the wheels from this type where in aluminium.The Polish versions where in magnesium
Hello.
I have ATS rimms, almost like this from pic - simillar but not the same. My are 7 inches / 13 / 4x98, I bring it from Hungray, must be totally renew.
You can see it here, but pictures are not perfect http://student.wsp.krakow.pl/~fleszer/ATS/
If I remember good some fiat 132 have ATS 6x13 4x98.
Hello,
J'm looking for vitaloni mirrors, the same like car on second pictures with ats wheels. I have fiat 125p 1971 akropolis totally renew and this is last thing that I need.
Maby You have idea about it
[
You can order them on page www.barrac.it, they are stil awoliable, and they look the same (black made of ABS) - only difference is that they have 3 screws on the bottom, not two like in 70'tys, but after fixing it is not poossible to se the difference.