Text only | Text with Images

abarth squadra storica forum

abarth cars - community => fiat abarth 750 / 850 and TC => Topic started by: red snapper on February 11, 2008, 04:05:33 AM

Title: fiat sunroof
Post by: red snapper on February 11, 2008, 04:05:33 AM
Hi, I have a 1956 fiat 600 with a factory sunroof. Sorta. I have a huge hole in my roof but no actual cover. Does anyone have any pictures of a 600 with a sunroof? I need to see how it should look. Thank,Brian.
Title: Re: fiat sunroof
Post by: trevor on February 11, 2008, 04:31:58 AM
Hi, These might assist. Cheers   Trevor
Title: Re: fiat sunroof
Post by: trevor on February 11, 2008, 04:44:48 AM
600D sunroof detail parts. Cheers trevor
Title: Re: fiat sunroof
Post by: red snapper on February 11, 2008, 04:31:34 PM
Thanks!!!
Title: Re: fiat sunroof
Post by: red snapper on February 21, 2008, 12:08:56 AM
One more question. Does the cover just sit on top of the bows or is it sewn into some sort of sleeve? My old pattern is so worn, I cant really tell. Thanks.
Title: Re: fiat sunroof
Post by: Pantdino on February 21, 2008, 04:47:17 AM

there must be pieces of material holding the top to the bows or the top would billow out like a parachute when you drove.

JIm
Title: Re: fiat sunroof
Post by: kammtail on February 25, 2008, 02:16:26 PM
Hello,

Hope this helps, I have a Fiat 600D with a sunroof . At the front the sunroof material slides over the sunroof mechanism then at the rear of the cover, is fixed at the back with a metal strip which clamps the cover down and hides the strip and screws, this also tensions the sunroof . And thats it !.If the cover flaps around when you are driving , you just adjust the tension.

Regards
Text only | Text with Images