Print Page - Oil Pressure Gauge for a A112 Engine.

Title: Oil Pressure Gauge for a A112 Engine.
Post by: kammtail on April 08, 2009, 09:23:35 PM

Hello Members,

Does anybody know what type or make of Oil Pressure Gauge I require for my Fiat 1000TC replica .
I have fitted a Autobianchi Abarth A112 Engine which has a new Electronic Oil Pressure Sender Unit fitted, I connected this to a Porsche 924 Oil Press gauge but once the engine is started the needle goes off the scale.
I have been told the sender must be matched to the Gauge ?
Any information would be a great help.

Thanks

Greg

Title: Re: Oil Pressure Gauge for a A112 Engine.
Post by: ChrisD on April 09, 2009, 12:11:54 PM

Yes the gauge need to be a mach to the oil preasure valve. Try out some aftermarket gauges. They are sold as pair (gauge and sender) and they can do the job pretty good

Title: Re: Oil Pressure Gauge for a A112 Engine.
Post by: guy moerenhout on April 09, 2009, 05:52:58 PM

fit a veglia and its ok

Title: Re: Oil Pressure Gauge for a A112 Engine.
Post by: kammtail on April 09, 2009, 10:33:06 PM

Thank you Chris and Guy for the information i will try the veglia route first as the sender is new.

Regards

Greg

abarth squadra storica forum

abarth cars - community => 1000 tc , radiale , replika => Topic started by: kammtail on April 08, 2009, 09:23:35 PM